Pro Tools Model 105 Die Sets
All Die Sets Include : Main Die, Backing Block,
Hoop Strap, Pin(s), Bolt(s) and are All Steel Billet
These are our standard dies. If you need a special size or need advice as to which radius die you may need for your job, please call and we will be glad to advise and help in any way possible. Bending square tubing thicker than 0.83 requires special dies.
| CLR Center Line Radius Meaning the bend radius is measured from the center of the rotation point on the die to the middle of the tubing. |
M-WALL Minimum recommended wall thickness for good hi quality bends when using D.O.M. or 4130 steel tubing |
ERW Welded Tubing Beware this type of tubing has thin spots which may cause bending problem. It is recommended when using this type to go one gauge thicker on the wall thickness |
Steel Billet Standard Round Tube Die Sets
Steel Billet Standard Pipe Die Sets (Schedule 40)
Steel Billet Standard Square Tube Die Sets
