Change your Mechanical Bender to hydraulics in just a few minutes, by simply removing
the ratchet assembly and installing the hydraulic conversion package.

Kit #2: 10 Ton Air Over Hydraulic Conversion Kit

$839.00

This is our Industrial Level air over hydraulic kit. It consists of everything you will need to convert your MB105 bender to hydraulics. Brackets, 10 ton cylinder with 14" stroke, Hi speed Industrial grade pump, line, and coupling. The unit is assembled, pressure checked, and puts out approx. 10 cu. in. of oil per minute. It has a 1year warranty, and can be rebuilt if it ever needs it. This unit extends and retracts very fast. Air requirement is 125 lbs of pressure to develop full power, and designed to work all day every day.

Kit # 3a: 20 Ton Dual Action Hydraulic Conversion Kit

$1,379.00

4,000PSI, 110 volt Hi volume/lower pressure system. This is the Mac Daddy of conversion kits for the MB105 Bender. If you want speed, try this – 1 ¾” x 0.095 D.O.M. tubing, bend one full stroke of the cylinder in 9 seconds, with an 8 second retract. The best system we have ever worked with. Period!

All parts can be purchased separately

Kit # 4 : 10 Ton Electric Hydraulic Conversion Kit

$1,559.00

If you would like to power your bender with electric, This is an excellent change over package. 110 volt, pumps approx. 20 cu. in. of oil per minute, has a remote hand control. Comes complete with cylinder, and brackets. The pump has been assembled, bled, and pressure checked.